{"title":"Part A","description":"\u003cp\u003e\u003cstrong\u003eCPP® Type A (Part A) Camlock adaptors\u003c\/strong\u003e combine a male Camlock connection with a female pipe thread for connecting hose systems to threaded equipment, valves and pipework.\u003c\/p\u003e\n\u003cp\u003eIn this collection, all \u003cstrong\u003eBSP female threads are BSPP\u003c\/strong\u003e (parallel) and all \u003cstrong\u003eNPT female threads are NPT\u003c\/strong\u003e (tapered).\u003c\/p\u003e\n\u003ch3\u003eConnection standards\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock:\u003c\/strong\u003e matching-size couplings manufactured to EN 14420-7 or U.S. specification A-A-59326\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBSPP female:\u003c\/strong\u003e parallel internal G thread to ISO 228-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNPT female:\u003c\/strong\u003e tapered internal pipe thread to ASME B1.20.1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e black glass-filled polypropylene (GFPP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCam arms and Camlock gasket:\u003c\/strong\u003e carried by the mating female Camlock coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorking pressure — water service\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCamlock size\u003c\/th\u003e\n\u003cth\u003e−10°C\u003c\/th\u003e\n\u003cth\u003e20°C\u003c\/th\u003e\n\u003cth\u003e65°C\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e½″–2″\u003c\/td\u003e\n\u003ctd\u003e5 bar \/ 73 psi\u003c\/td\u003e\n\u003ctd\u003e6.5 bar \/ 94 psi\u003c\/td\u003e\n\u003ctd\u003e3 bar \/ 44 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3″\u003c\/td\u003e\n\u003ctd\u003e3 bar \/ 44 psi\u003c\/td\u003e\n\u003ctd\u003e5 bar \/ 73 psi\u003c\/td\u003e\n\u003ctd\u003e2 bar \/ 29 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4″\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003ctd\u003e3.5 bar \/ 51 psi\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePressure figures are for water service. The complete assembly is limited by its lowest-rated component, and chemical compatibility and temperature must be checked for the intended application.\u003c\/p\u003e\n\u003cp\u003eCheck both the Camlock head size and the female thread size before ordering, particularly on reducer versions where the two nominal sizes differ.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eView the CPP® Camlock size chart\u003c\/a\u003e for connection dimensions.\u003c\/p\u003e","products":[{"product_id":"1-2-part-a-3-4-camlock-adaptor-x-1-2-bsp-female-g-p-p","title":"¾″ Male Camlock × ½″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching ¾″ female Camlock coupler to equipment or pipework through its ½″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ½″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G ½.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA05B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ½″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a ½″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493628485980,"sku":"CMA05B027","price":2.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma-05b-027.jpg?v=1728231110"},{"product_id":"1-2-part-a-3-4-camlock-adaptor-x-1-2-npt-female-g-p-p","title":"¾″ Male Camlock × ½″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching ¾″ female Camlock coupler to equipment or pipework through its ½″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ½″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA05N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ½″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a ½″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493629534556,"sku":"CMA05N027","price":2.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/ac4d194a-2579-411d-b33c-a85225275e6d.png?v=1789930339"},{"product_id":"1-x-1-part-a-1-camlock-adapter-x-1-bsp-female-g-p-p","title":"1″ Male Camlock × 1¼″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 1″ female Camlock coupler to equipment or pipework through its 1¼″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA1012B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493634154844,"sku":"CMA1012B027","price":4.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma1012n027.png?v=1728231136"},{"product_id":"1-x-1-part-a-1-camlock-adaptor-x-1-npt-female-g-p-p","title":"1″ Male Camlock × 1¼″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 1″ female Camlock coupler to equipment or pipework through its 1¼″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA1012N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493635432796,"sku":"CMA1012N027","price":4.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma-1012b-027.jpg?v=1728231142"},{"product_id":"1-part-a-1-camlock-adaptor-x-1-bsp-female-g-p-p","title":"1″ Male Camlock × 1″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 1″ female Camlock coupler to equipment or pipework through its 1″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA10B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493637988700,"sku":"CMA10B027","price":3.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma-10b-027.jpg?v=1728231158"},{"product_id":"1-part-a-1-camlock-adaptor-x-1-npt-female-g-p-p","title":"1″ Male Camlock × 1″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 1″ female Camlock coupler to equipment or pipework through its 1″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA10N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493639135580,"sku":"CMA10N027","price":3.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma10n027.png?v=1728231163"},{"product_id":"1-1-2-x-11-4-part-a-11-2-camlock-adaptor-x-11-4-bsp-female-g-p-p","title":"1½″ Male Camlock × 1¼″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 1½″ female Camlock coupler to equipment or pipework through its 1¼″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA12B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493644443996,"sku":"CMA12B027","price":4.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma-12b-027.jpg?v=1728231191"},{"product_id":"1-1-2-x-11-4-part-a-11-2-camlock-adaptor-x-11-4-npt-female-g-p-p","title":"1½″ Male Camlock × 1¼″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 1½″ female Camlock coupler to equipment or pipework through its 1¼″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA12N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493645525340,"sku":"CMA12N027","price":4.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/fb0fabcd-2c6e-4bdd-8c27-133ec4b8aedb.png?v=1789930345"},{"product_id":"11-2-part-a-11-2-camlock-adaptor-x-11-2-bsp-female-g-p-p","title":"1½″ Male Camlock × 1½″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 1½″ female Camlock coupler to equipment or pipework through its 1½″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1½″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1½.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA15B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1½″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1½″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493647655260,"sku":"CMA15B027","price":4.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma15b027.png?v=1728231207"},{"product_id":"11-2-part-a-11-2-camlock-adaptor-x-11-2-npt-female-g-p-p","title":"1½″ Male Camlock × 1½″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 1½″ female Camlock coupler to equipment or pipework through its 1½″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1½″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA15N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1½″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1½″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493648539996,"sku":"CMA15N027","price":4.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma15n027.png?v=1728231213"},{"product_id":"true-1-part-a-1-camlock-adaptor-x-1-bsp-female-g-p-p","title":"True 1¼″ Male Camlock × 1¼″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching True 1¼″ female Camlock coupler to equipment or pipework through its 1¼″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e True 1¼″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA16B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching True 1¼″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is True 1¼″; check both connections when selecting the fitting. This is the true 1¼″ Camlock profile; check the head dimensions to distinguish it from products with a 1½″ Camlock head and a 1¼″ hose or thread connection.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493651292508,"sku":"CMA16B027","price":4.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma-16b-027.jpg?v=1728231225"},{"product_id":"true-1-part-a-1-camlock-adaptor-x-1-npt-female-g-p-p","title":"True 1¼″ Male Camlock × 1¼″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching True 1¼″ female Camlock coupler to equipment or pipework through its 1¼″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e True 1¼″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA16N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching True 1¼″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is True 1¼″; check both connections when selecting the fitting. This is the true 1¼″ Camlock profile; check the head dimensions to distinguish it from products with a 1½″ Camlock head and a 1¼″ hose or thread connection.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493652078940,"sku":"CMA16N027","price":4.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/8ebb22a8-b176-4111-abc8-125d7766a70a.png?v=1789930349"},{"product_id":"2-part-a-2-camlock-adaptor-x-2-npt-female-g-p-p","title":"2″ Male Camlock × 2″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 2″ female Camlock coupler to equipment or pipework through its 2″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 2″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA20N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 2″ measurement refers to the nominal pipe thread size. The Camlock head is 2″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 2″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493660926300,"sku":"CMA20N027","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/215dd274-885a-49a0-bddf-290bf689a004.png?v=1789930343"},{"product_id":"3-part-a-3-camlock-adaptor-x-3-bsp-female-g-p-p","title":"3″ Male Camlock × 3″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 3″ female Camlock coupler to equipment or pipework through its 3″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA30B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 3″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 3″ measurement refers to the nominal pipe thread size. The Camlock head is 3″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 3″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e2 bar (approximately 29 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 3″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493665546588,"sku":"CMA30B027","price":15.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma-30b-027.jpg?v=1728231305"},{"product_id":"3-part-a-3-camlock-adaptor-x-3-npt-female-g-p-p","title":"3″ Male Camlock × 3″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 3″ female Camlock coupler to equipment or pipework through its 3″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA30N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 3″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 3″ measurement refers to the nominal pipe thread size. The Camlock head is 3″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 3″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e2 bar (approximately 29 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 3″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493666333020,"sku":"CMA30N027","price":15.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma30n027.png?v=1728231310"},{"product_id":"4-part-a-4-camlock-adaptor-x-4-bsp-female-g-p-p","title":"4″ Male Camlock × 4″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 4″ female Camlock coupler to equipment or pipework through its 4″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 4″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 4″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA40B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 4″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 4″ measurement refers to the nominal pipe thread size. The Camlock head is 4″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 4″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e3.5 bar (approximately 51 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 4″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component. No rating is specified for 4″ Camlocks at −10°C or 65°C.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493670265180,"sku":"CMA40B027","price":26.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma-40b-027.jpg?v=1728231335"},{"product_id":"4-part-a-4-camlock-adaptor-x-4-npt-female-g-p-p","title":"4″ Male Camlock × 4″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 4″ female Camlock coupler to equipment or pipework through its 4″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 4″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 4″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA40N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 4″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 4″ measurement refers to the nominal pipe thread size. The Camlock head is 4″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 4″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e3.5 bar (approximately 51 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 4″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component. No rating is specified for 4″ Camlocks at −10°C or 65°C.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493670953308,"sku":"CMA40N027","price":26.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cf840628-4e75-4809-b603-a9f1ee8d2010.png?v=1789930341"},{"product_id":"3-4-part-a-3-4-camlock-adaptor-x-3-4-bsp-female-g-p-p","title":"¾″ Male Camlock × ¾″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching ¾″ female Camlock coupler to equipment or pipework through its ¾″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ¾″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G ¾.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA75B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ¾″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a ¾″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493672984924,"sku":"CMA75B027","price":2.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma-75b-027.jpg?v=1728231345"},{"product_id":"3-4-part-a-3-4-camlock-adaptor-x-3-4-npt-female-g-p-p","title":"¾″ Male Camlock × ¾″ NPT Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching ¾″ female Camlock coupler to equipment or pipework through its ¾″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ¾″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA75N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ¾″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a ¾″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493675180380,"sku":"CMA75N027","price":2.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/16f46a56-2b19-4edb-8b33-e57fdb64617a.png?v=1789930345"},{"product_id":"2-part-a-2-camlock-adaptor-x-1-bsp-female-g-p-p","title":"2″ Male Camlock × 1¼″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eType A (Part A)\u003c\/strong\u003e adaptor connects a \u003cstrong\u003e2″ Male Camlock\u003c\/strong\u003e to a \u003cstrong\u003e1¼″ BSPP Female\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eConnects a matching 2″ female Camlock coupler to smaller threaded pipework or equipment using the specified thread.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ Male Camlock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther connection:\u003c\/strong\u003e 1¼″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e black glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e CMAR2012B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConnection specification and fit\u003c\/h3\u003e\u003cp\u003eBSPP (British Standard Pipe Parallel): parallel internal thread to ISO 228-1, designation G. Select the correct mating fitting and sealing arrangement; the Camlock gasket seals only the Camlock joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326. Check the mating dimensions using the CPP® size chart.\u003c\/p\u003e\u003cp\u003eThis male adaptor engages with the cam arms and gasket in the mating female coupler; those components are carried by the female coupler.\u003c\/p\u003e\u003ch3\u003eWorking pressure — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWorking pressure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar \/ approx. 73 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar \/ approx. 94 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar \/ approx. 44 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese guide ratings are based on water service. The complete assembly is limited by its lowest-rated component. Verify suitability under the intended operating conditions, including the liquid and temperature.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck both connection sizes before ordering. Confirm the compatibility of the body, seals and connected components with the liquid and temperature. Support hoses and pipework to reduce strain on the fitting, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eSize, chemical compatibility and material guidance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eCPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493676130652,"sku":"CMAR2012B027","price":12.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cmar2012b027.png?v=1731512576"},{"product_id":"2-part-a-2-camlock-adaptor-x-1-bsp-female-g-p-p-1","title":"2″ Male Camlock × 1½″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eType A (Part A)\u003c\/strong\u003e adaptor connects a \u003cstrong\u003e2″ Male Camlock\u003c\/strong\u003e to a \u003cstrong\u003e1½″ BSPP Female\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eConnects a matching 2″ female Camlock coupler to smaller threaded pipework or equipment using the specified thread.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ Male Camlock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther connection:\u003c\/strong\u003e 1½″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e black glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e CMAR2015B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConnection specification and fit\u003c\/h3\u003e\u003cp\u003eBSPP (British Standard Pipe Parallel): parallel internal thread to ISO 228-1, designation G. Select the correct mating fitting and sealing arrangement; the Camlock gasket seals only the Camlock joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326. Check the mating dimensions using the CPP® size chart.\u003c\/p\u003e\u003cp\u003eThis male adaptor engages with the cam arms and gasket in the mating female coupler; those components are carried by the female coupler.\u003c\/p\u003e\u003ch3\u003eWorking pressure — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWorking pressure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar \/ approx. 73 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar \/ approx. 94 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar \/ approx. 44 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese guide ratings are based on water service. The complete assembly is limited by its lowest-rated component. Verify suitability under the intended operating conditions, including the liquid and temperature.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck both connection sizes before ordering. Confirm the compatibility of the body, seals and connected components with the liquid and temperature. Support hoses and pipework to reduce strain on the fitting, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eSize, chemical compatibility and material guidance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eCPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493676196188,"sku":"CMAR2015B027","price":12.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CMAR2015B027.png?v=1747126152"},{"product_id":"2-part-a-2-camlock-adaptor-x-2-bsp-female-g-p-p-13","title":"2″ Male Camlock × 2″ BSPP Female (Type A) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type A (Part A) adaptor connects a matching 2″ female Camlock coupler to equipment or pipework through its 2″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the adaptor has a male Camlock profile that fits inside a matching female coupler. The cam arms and sealing gasket are carried by the mating female coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type A (Part A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 2″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CMA20B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ female Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 2″ measurement refers to the nominal pipe thread size. The Camlock head is 2″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 2″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP®","offers":[{"title":"Default Title","offer_id":53443484320092,"sku":"CMA20B027","price":5.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CMA20B027.png?v=1733863750"}],"url":"https:\/\/row.cpp.parts\/collections\/part-a.oembed","provider":"CPP.PARTS","version":"1.0","type":"link"}