{"title":"2″ Female Camlock Swivel Couplings","description":"\u003cp\u003e\u003cstrong\u003eCPP® 2″ Female Camlock Swivel Couplings\u003c\/strong\u003e connect a matching 2″ male Camlock adaptor to a hose or threaded connection. Choose the outlet size and connection required for your liquid-transfer equipment, tanks, hoses or pipework.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eManufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e, these swivel couplings use a \u003cstrong\u003ePP Olefin Elastomer gasket\u003c\/strong\u003e. Their working pressure is \u003cstrong\u003e60 psi (approximately 4.1 bar) at 20°C\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3\u003eChoose your connection\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType SB (Part SB):\u003c\/strong\u003e 2″ female Camlock swivel × male thread. Options include BSPT, NPT and ¾″–11.5 NHR US garden-hose thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType SC (Part SC):\u003c\/strong\u003e 2″ female Camlock swivel × hose tail, with listed hose sizes from ½″ (13 mm) to 2″ (50 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType SD (Part SD):\u003c\/strong\u003e 2″ female Camlock swivel × female thread, with BSPP and NPT options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003ch3\u003eThread standards and sizing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBSP male:\u003c\/strong\u003e BSPT tapered external thread to ISO 7-1, designation R.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBSP female:\u003c\/strong\u003e BSPP parallel internal thread to ISO 228-1, designation G.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNPT:\u003c\/strong\u003e Tapered male or female pipe thread to ASME B1.20.1, where listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNHR garden hose:\u003c\/strong\u003e ¾″–11.5 NHR male thread, with 11.5 threads per inch; select a matching US garden-hose connector.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAll products in this range have a 2″ female Camlock head. The hose or threaded outlet can be a different size. Check both ends and the individual product specification before ordering. BSP, NPT and garden-hose connections use different thread standards.\u003c\/p\u003e\u003ch3\u003eWorking pressure and use\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e60 psi at 20°C.\u003c\/strong\u003e Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component. Check compatibility of the body and gasket with the liquid, fit suitable hose clamps or thread seals, and avoid overtightening plastic threads. Support hoses and pipework and depressurise before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"2-part-sb-2-camlock-swivel-coupler-x-bsp-male-g-p-p","title":"2″ Female Camlock Swivel × ¾″ BSPT Male (Type SB) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SB (Part SB) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its ¾″ BSPT male thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SB (Part SB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e ¾″ BSPT Male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1, designation R ¾; tapered external thread (BSPT).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSB20075B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ¾″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This coupling has a BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing arrangement suitable for the plastic fitting and application. The Camlock gasket seals the Camlock joint, not the threaded connection.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493577531740,"sku":"CFSB20075B027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfsb-20075b-027.png?v=1742554046"},{"product_id":"2-part-sb-2-camlock-swivel-coupler-x-11-5-nhr-male-garden-thread-g-p-p","title":"2″ Female Camlock Swivel × ¾″–11.5 NHR Male Garden Hose Thread (Type SB) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SB (Part SB) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its ¾″–11.5 NHR male garden-hose thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SB (Part SB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e ¾″–11.5 NHR Male Garden Hose Thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarden-hose thread:\u003c\/strong\u003e ¾″–11.5 NHR male; 11.5 threads per inch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSB20075HR027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ¾″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eUS garden-hose connection\u003c\/h3\u003e\u003cp\u003eThe outlet has a ¾″–11.5 NHR male garden-hose thread. Select a matching US garden-hose female connector with the correct sealing arrangement. This connection is not a ¾″ BSP or NPT pipe thread.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493578842460,"sku":"CFSB20075HR027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFSB-20075HR-027.png?v=1747132548"},{"product_id":"2-part-sb-2-camlock-swivel-coupler-x-npt-male-g-p-p","title":"2″ Female Camlock Swivel × ¾″ NPT Male (Type SB) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SB (Part SB) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its ¾″ NPT male thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SB (Part SB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e ¾″ NPT Male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1; tapered external thread (NPT).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSB20075N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ¾″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This coupling has a tapered NPT thread to ASME B1.20.1. Choose a matching NPT connection and suitable sealing method. NPT and BSP are different thread standards. The Camlock gasket does not seal the threaded connection.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493580120412,"sku":"CFSB20075N027","price":32.78,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfsb-20075b-027_e633f28f-8507-4415-975b-7ebfbc46cec6.png?v=1731512338"},{"product_id":"2-part-sb-2-camlock-swivel-coupler-x-1-bsp-male-g-p-p","title":"2″ Female Camlock Swivel × 1″ BSPT Male (Type SB) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SB (Part SB) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its 1″ BSPT male thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SB (Part SB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e 1″ BSPT Male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1, designation R 1; tapered external thread (BSPT).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSB2010B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The 1″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This coupling has a BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing arrangement suitable for the plastic fitting and application. The Camlock gasket seals the Camlock joint, not the threaded connection.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493580251484,"sku":"CFSB2010B027","price":31.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFSB-2010B-027.png?v=1747132247"},{"product_id":"2-part-sb-2-camlock-swivel-coupler-x-1-bsp-male-g-p-p-1","title":"2″ Female Camlock Swivel × 1¼″ BSPT Male (Type SB) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SB (Part SB) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its 1¼″ BSPT male thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SB (Part SB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e 1¼″ BSPT Male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1, designation R 1¼; tapered external thread (BSPT).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSB2012B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The 1¼″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This coupling has a BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing arrangement suitable for the plastic fitting and application. The Camlock gasket seals the Camlock joint, not the threaded connection.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493581791580,"sku":"CFSB2012B027","price":31.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFSB-2012B-027.png?v=1747132015"},{"product_id":"2-part-sc-2-camlock-swivel-coupler-x-13mm-hose-tail-g-p-p","title":"2″ Female Camlock Swivel × ½″ (13 mm) Hose Tail (Type SC) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SC (Part SC) swivel coupling connects a matching 2″ male Camlock adaptor to a hose with a nominal 13 mm internal diameter. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SC (Part SC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e ½″ (13 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSC20C05T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ½″ measurement refers to the hose connection; use the listed 13 mm nominal hose internal diameter. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493582741852,"sku":"CFSC20C05T027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFSC-20C05T-027.jpg?v=1733503353"},{"product_id":"2-part-sc-2-camlock-swivel-coupler-x-16mm-hose-tail-g-p-p","title":"2″ Female Camlock Swivel × ⅝″ (16 mm) Hose Tail (Type SC) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SC (Part SC) swivel coupling connects a matching 2″ male Camlock adaptor to a hose with a nominal 16 mm internal diameter. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SC (Part SC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e ⅝″ (16 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSC20C063T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ⅝″ measurement refers to the hose connection; use the listed 16 mm nominal hose internal diameter. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493583397212,"sku":"CFSC20C063T027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfsc-20c063t-027.jpg?v=1728230916"},{"product_id":"2-part-sc-2-camlock-swivel-coupler-x-20mm-hose-tail-g-p-p","title":"2″ Female Camlock Swivel × ¾″ (19 mm) Hose Tail (Type SC) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SC (Part SC) swivel coupling connects a matching 2″ male Camlock adaptor to a hose with a nominal 19 mm internal diameter. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SC (Part SC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e ¾″ (19 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSC20C075T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ¾″ measurement refers to the hose connection; use the listed 19 mm nominal hose internal diameter. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493584806236,"sku":"CFSC20C075T027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfsc-20c075t-027.jpg?v=1728230922"},{"product_id":"2-part-sc-2-camlock-swivel-coupler-x-1-25mm-hose-tail-g-p-p","title":"2″ Female Camlock Swivel × 1″ (25 mm) Hose Tail (Type SC) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SC (Part SC) swivel coupling connects a matching 2″ male Camlock adaptor to a hose with a nominal 25 mm internal diameter. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SC (Part SC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1″ (25 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSC20C10T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The 1″ measurement refers to the hose connection; use the listed 25 mm nominal hose internal diameter. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493586051420,"sku":"CFSC20C10T027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfsc-20c10t0-27.jpg?v=1728230929"},{"product_id":"2-part-sc-2-camlock-swivel-coupler-x-1-32mm-hose-tail-g-p-p","title":"2″ Female Camlock Swivel × 1¼″ (32 mm) Hose Tail (Type SC) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SC (Part SC) swivel coupling connects a matching 2″ male Camlock adaptor to a hose with a nominal 32 mm internal diameter. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SC (Part SC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1¼″ (32 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSC20C12T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The 1¼″ measurement refers to the hose connection; use the listed 32 mm nominal hose internal diameter. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493587886428,"sku":"CFSC20C12T027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfsc-20c12t-027.jpg?v=1728230934"},{"product_id":"2-part-sc-2-camlock-swivel-coupler-x-1-38mm-hose-tail-g-p-p","title":"2″ Female Camlock Swivel × 1½″ (38 mm) Hose Tail (Type SC) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SC (Part SC) swivel coupling connects a matching 2″ male Camlock adaptor to a hose with a nominal 38 mm internal diameter. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SC (Part SC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1½″ (38 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSC20C15T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The 1½″ measurement refers to the hose connection; use the listed 38 mm nominal hose internal diameter. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493589033308,"sku":"CFSC20C15T027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfsc-20c15t-027.jpg?v=1728230940"},{"product_id":"2-part-sc-2-camlock-swivel-coupler-x-2-50mm-hose-tail-g-p-p","title":"2″ Female Camlock Swivel × 2″ (50 mm) Hose Tail (Type SC) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SC (Part SC) swivel coupling connects a matching 2″ male Camlock adaptor to a hose with a nominal 50 mm internal diameter. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SC (Part SC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 2″ (50 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSC20T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The 2″ measurement refers to the hose connection; use the listed 50 mm nominal hose internal diameter. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493590540636,"sku":"CFSC20T027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfsc20t027.jpg?v=1728230945"},{"product_id":"2-part-sd-2-camlock-swivel-coupler-x-bsp-female-g-p-p","title":"2″ Female Camlock Swivel × ½″ BSPP Female (Type SD) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SD (Part SD) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its ½″ BSPP female thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SD (Part SD).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e ½″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1, designation G ½; parallel internal thread (BSPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSD2005B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ½″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This coupling has a BSPP female thread to ISO 228-1. Use a compatible mating thread and a sealing arrangement suitable for the plastic fitting and application. The Camlock gasket seals the Camlock joint, not the threaded connection.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493591261532,"sku":"CFSD2005B027","price":31.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFSD2005B027_f87c43c2-485d-48dc-af22-79ba765b7fa8.png?v=1742553217"},{"product_id":"2-part-sd-2-camlock-swivel-coupler-x-bsp-female-g-p-p-1","title":"2″ Female Camlock Swivel × ¾″ BSPP Female (Type SD) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SD (Part SD) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its ¾″ BSPP female thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SD (Part SD).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e ¾″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1, designation G ¾; parallel internal thread (BSPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSD20075B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ¾″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This coupling has a BSPP female thread to ISO 228-1. Use a compatible mating thread and a sealing arrangement suitable for the plastic fitting and application. The Camlock gasket seals the Camlock joint, not the threaded connection.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493592277340,"sku":"CFSD20075B027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFSD20075B027.png?v=1742553441"},{"product_id":"2-part-sd-2-camlock-swivel-coupler-x-npt-female-g-p-p","title":"2″ Female Camlock Swivel × ¾″ NPT Female (Type SD) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SD (Part SD) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its ¾″ NPT female thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SD (Part SD).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e ¾″ NPT Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1; tapered internal thread (NPT).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSD20075N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The ¾″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This coupling has a tapered NPT thread to ASME B1.20.1. Choose a matching NPT connection and suitable sealing method. NPT and BSP are different thread standards. The Camlock gasket does not seal the threaded connection.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493593555292,"sku":"CFSD20075N027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFSD20075B027_4f420e13-cee1-4ac1-a831-d2da5708bf45.png?v=1742553546"},{"product_id":"2-part-sd-2-camlock-swivel-coupler-x-1-bsp-female-g-p-p","title":"2″ Female Camlock Swivel × 1″ BSPP Female (Type SD) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type SD (Part SD) swivel coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its 1″ BSPP female thread. Its swivel construction is an alternative to a fixed-body Camlock coupling for liquid-transfer hose and pipework connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUseful where space is restricted:\u003c\/strong\u003e The swivel design helps position the connected hose or fitting where clearance around an IBC outlet is limited.\u003c\/p\u003e\u003cp\u003eThe body is manufactured from \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e and the gasket is a \u003cstrong\u003ePP Olefin Elastomer\u003c\/strong\u003e. The female Camlock head uses cam arms to secure the matching male adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female, swivel coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Type SD (Part SD).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e 1″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1, designation G 1; parallel internal thread (BSPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket material:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 60 psi (approximately 4.1 bar) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFSD2010B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The Camlock head is 2″. The 1″ measurement refers to the threaded connection. Check both ends before ordering.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This coupling has a BSPP female thread to ISO 228-1. Use a compatible mating thread and a sealing arrangement suitable for the plastic fitting and application. The Camlock gasket seals the Camlock joint, not the threaded connection.\u003c\/p\u003e\u003ch3\u003ePressure and installation\u003c\/h3\u003e\u003cp\u003eThe swivel assembly has a working pressure of \u003cstrong\u003e60 psi at 20°C\u003c\/strong\u003e. Check suitability with CPP® for other operating temperatures. The complete installation is limited by its lowest-rated component.\u003c\/p\u003e\u003cp\u003eUse a suitable thread seal and avoid overtightening plastic threads. Check compatibility of the body and gasket with the liquid and operating conditions. Support attached hoses and pipework to avoid strain, and depressurise the system before disconnecting the assembly.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493594079580,"sku":"CFSD2010B027","price":32.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFSD2010B027_0d145e0d-d7b2-44b5-9bdc-c80fe9e52186.png?v=1742553701"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/collections\/2_c_2ht_cut.png?v=1789562333","url":"https:\/\/row.cpp.parts\/collections\/swivels.oembed","provider":"CPP.PARTS","version":"1.0","type":"link"}